14

2023

-

09

[Standard Interpretation] - An Interpretation of ASTM D4169


ASTM D4169

Developed

General Procedures for Transport Packaging Performance Testing

(1) Understand the relevant characteristics of transport packaging (e.g., dimensions, weight, structural design, and handling methods during transportation—whether manual or mechanical).

(2) Clearly define the confidence level for the test items.

(3) Establish acceptable criteria for the test experiment.

(4) Select the delivery cycle from the table that most closely matches the expected shipping method.

 

 

ASTM D4169

Clearly defined

Transport Packaging Delivery Cycle and Corresponding Test Plan  

The delivery cycle, broadly speaking, can be understood as the entire logistical environment that a shipping package may encounter—from the moment production is completed until the product reaches the consumer. In ASTM D4169, it is defined as a test checklist listing all the individual test items in sequence, as shown in the table.

 

 

ASTM D4169

Set up

Test strength rating for shipping packages

The "assurance level" refers to the intensity of testing applied, based on the likelihood of a specific risk occurring during the transportation and packaging process. Before testing begins, it’s essential to comprehensively consider factors such as the value of the transported product, the expected tolerable degree of damage, the quantity of goods, and insights into the transportation environment—allowing you to clearly define the assurance level for each test item.

Based on the test intensity and the probability of risk occurrence, the assurance levels are divided into three grades: I, II, and III. Grade I represents the highest test intensity, while Grade III indicates the lowest; Grade II falls in between. ASTM D4169 specifies test conditions for each individual test item under the different assurance levels, as illustrated in Table 1 titled "Test Conditions for Free Drop Test in Handling and Loading Test for Item A."

 

Let me focus mainly on the DC13 among them.

Because this is the most commonly used one.

DC13 from ASTM D4169

 

Temperature and Humidity Pre-treatment

From south to north, temperature and humidity vary significantly throughout the year, making it essential to simulate climate changes and assess how packaging adapts under such conditions. For instance, as relative humidity increases, the moisture content of corrugated cardboard boxes rises steadily. Actual data shows that when humidity climbs from 65% to 85%, the moisture content jumps from 10.8% to 11.8%. Simultaneously, the box's compressive strength drops dramatically—from 6,700 N down to 4,100 N.

 

Manual handling (first time)

During actual transportation, products undergo various handling processes, which may lead to packaging drops. To assess the vulnerability of the packaging under such conditions, drop tests are conducted.

 

Pressure testing

There are two scenarios for the pressure test: storage stacking and vehicle stacking. During actual transportation, packages undergo both storage stacking and transit stacking. The pressure test simulates how well the bottom package can withstand compressive forces when stored or transported under typical conditions.

 

Vibration Testing (Fixed-Frequency Vibration)

Fixed-frequency vibration is the most basic type of vibration test, used to determine a package's ability to withstand vibrations in a specific environmental condition.

 

Low-pressure test

During air and high-altitude transportation, packages often encounter environments characterized by low temperatures and reduced atmospheric pressure—specifically at an average altitude of 3,000 meters (70 kPa). To assess how well packaging can withstand these extreme conditions, a low-temperature and low-pressure test is conducted.

 

Vibration Testing (Random Vibration)

During actual transportation, packaging items experience vibrations due to varying road conditions. Vibration testing simulates the diverse vibrational forces that products encounter during road, rail, and air transport, helping to evaluate the packaging's ability to withstand environmental vibrations under real-world conditions.

 

Focused Impact

During transportation, packaging items may occasionally experience localized external impacts. Therefore, a concentrated impact test is used to simulate the package's ability to withstand non-repeated, single mechanical shocks—making it particularly useful for evaluating how well low-quality packaging containers protect their contents.

 

Manual handling (second time)

After the goods arrive at their destination following a long journey, they still need to be moved again once unloaded—and then undergo another drop test to assess the packaging's vulnerability.

 

undefined

undefined