21

2022

-

04

Adhesive tapes require these several testing procedures.


Tape is one of the essential little items in everyday life—there’s hardly anything you can’t stick together with it. And of course, there are many different types of tape available.

Each has its own specific application—for example, "clear tape is primarily used for sealing and taping boxes, while aluminum foil tape is ideal for insulation and sealing."

Masking tape is commonly used in decoration and interior design, while electrical tape is intended for wiring…

Today, let’s introduce the main tests conducted on adhesive tapes. These include: width, initial adhesion, cohesive strength, peel resistance, elongation at break, tensile strength, and shear adhesion.

 

Width

The degree of width and narrowness; the horizontal distance

Xiaomin on Testing: This test helps you determine the specific tape specifications you need.

 

Initial tackiness

It is a property of adhesives that allows them to form an immediately measurable bond strength upon contact with the adherend, even under low pressure.

Xiaomin on Testing: The quality of initial adhesion directly affects the overall quality of adhesive tape. Commonly used standards for testing initial adhesion include GB-T 4852, the Test Method for Initial Adhesion of Pressure-Sensitive Adhesive Tapes (Rolling Ball Method), which typically specifies the size of the steel ball—where a larger steel ball indicates even stronger initial adhesion.

 

Adhesive tack

Adhesion retention refers to the ability of adhesive tape, when a weight is hung vertically along its length from the adhered object, to maintain its sticky hold over time.

Xiaomin on Testing: A commonly used standard for evaluating the adhesion retention of adhesive tapes is GB/T 4851, the Test Method for Adhesion Retention of Pressure-Sensitive Adhesive Tapes. If the adhesion retention is too poor, the tape may easily peel off, failing to achieve its intended bonding purpose. On the other hand, if the adhesion retention is excessively strong, it could cause damage to the adhered object when it’s removed from the surface.

 

Unwinding strength

Tear strength is the load required per unit width to unwind a roll of adhesive tape under specific test conditions, expressed in N/mm.

Xiaomin on Testing: Throughout the entire experimental process, you can carefully observe abnormal phenomena occurring as the tape is unwound—such as adhesive migration, tearing, or substrate delamination.

 

Elongation at break

It is expressed as a percentage (%) and typically refers to the ratio of the sample's displacement at fracture to its original length.

Xiaomin Talks Testing:

Tensile elongation at break typically refers to the elongation observed throughout the entire testing process. It’s a key parameter that reflects a material’s toughness! Indeed, tensile elongation at break is an essential metric when evaluating a material’s tensile properties.

 

Tensile strength

It refers to the stress at which a material undergoes its maximum uniform plastic deformation.

Xiaomin Talks Testing:

Tensile performance is a crucial physical and mechanical property indicator for adhesive tapes. By applying tensile loads along the transverse and longitudinal axes of the sample, the material is deformed—ultimately leading to failure—allowing us to assess the tensile stress of the packaging material. For tensile tests, the sample length plays a key role: the longer the sample, the higher the likelihood of a weak link, resulting in reduced overall strength.

 

Peel strength

Peel strength refers to the force required to peel off a unit-width adhesive tape from a specific bonding surface at a given angle and rate.

Measure the peel force—determined by the continuous removal of the adhesive tape from the stainless steel plate—at the specified rate, then convert it into peel strength.

Xiaomin Talks Testing: The peel strength of adhesive tape is an important performance indicator that characterizes its adhesive properties. The magnitude of this indicator directly reflects the adhesive strength of the tape. By monitoring the tape's peel strength, its adhesive performance can be effectively controlled.

 

Aging Test

The aging test primarily refers to thermo-oxidative aging tests conducted on rubber, plastic products, electrical insulation materials, and other such materials.

Xiaomin on Testing: In practical use, adhesive tape’s physicochemical properties can degrade or even be lost due to environmental factors such as light, water, and temperature—leading to issues like surface discoloration, loss of gloss, cracking, increased brittleness, hardening, and powdery deterioration.

undefined

undefined